LYSAGHT KLIP-LOK 700 Roll Forming Machinery Manufacture for Sale
LYSAGHT KLIP-LOK® 700 is a new generation, widecover, concealed fixed cladding. Made of high tensile steel of 550 MPa yield strength, it has a wider span, with better uplift performance than all available comparable profiles. Visually, you get a bold rib that makes a strong statement rising from the flat pans that are cross micro fluted.
Our extensive research shows that thermal expansion and contraction can be controlled better using a concealed fixed system. Since the effect is on the longitudinal direction, wider coverage of LYSAGHT KLIP-LOK® 700 provides the best alternative. It is well suited to both general environment and coastal environment.
The profile is fixed on a specially designed clip known as KL-70, manufactured from high tensile steel base and designed tower to withhold high wind pressure. This provides accuracy, economy and ease during the installation and makes it a superior product designed to last long.
1. Specification of the material
| 1 | Suitable Material | Colored Steel plate, Galvanized steel |
| 2 | Width of the raw material | According to final profile |
| 3 | Thickness | 0.3-0.8mm |
2. Machine Detailed Parameters
| 1 | Roll Forming Machine
| LYSAGHT KLIP-LOK 700 |
| 2 | Machine structure
| Wall board structure |
| 3 | Total power | Motor power-7.5kw
Hydraulic power-5.5kw |
| 4 | Roller stations
| About 22 stations |
| 5 | Productivity
| 12-15m/min |
| 6 | Drive system
| By chain,1.0 inch |
| 7 | Diameter of shaft
| ￠75mm solid shaft |
| 8 | Voltage
| 380V 50Hz 3phases (Customized) |
| 9 | Color Of The Machine
| Bule and yellow |
| 10 | Deliver time
| 70 days |
| 11 | Terms Of Payment
| 30%T/T 70% pay before shipment |
3. Profile drawing
4. The Chart of Process Flow
Hydraulic Uncoiler—Roll Forming—Cutting—Out table
5. Specification of Components
(1) 5T Hydraulic Un-coiler
- Width of feeding: 1250mm
- Capability: 5 Ton
- Inter diameter: 470-520mm
- Maximal out diameter: 1500mm
- Working speed: 0--20m/min adjustable
- Main motor power: 5.5KW AC motor
- Hydraulic power: 4kw
(2) Main Roll Forming Machine
- Roller material:ASTM1045 chrome plated surface with chrome
- Shaft diameter: ￠70mm material: SAE1045 with quenching and tempering
- Main frame by 350H beam welding
- Machine structure: wall board
(3) Hydraulic cutting system
- Cutting after forming: Cut the sheet after roll forming to required length
- Material of blade:Cr12, 58-62 HRC hardness
- Cutting power by hydraulic,4KW
- Working pressure: 12Mpa adjustable
- Length measuring: Automatic encoder length measuring
- Tolerance of length: +/- 1.5mm for each piece end product
(4) Computer Control Cabinet
- Programmable setting of profile length and quantity
- Operating system language: English and Chinese
- Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
- PLC: Panasonic or customerization
Product Tags:
|
|
Forge Steel Roof Panel Roll Forming Machinery 0.8mm 22 Stations Images
|
